Breaking the Bond: 海角社区 ChE Professor Creates Reactor-Separator to Upgrade Methane
BATON ROUGE, LA 鈥� A century ago, natural gas was not the hot commodity it is today.
A byproduct of oil production, or fracking, natural gas is now abundant and low-cost,
resulting in its high demand for energy production.
The gas not only powers homes and cars, but the hydrocarbons that make up the gas, such as methane, can be converted and used for creating other products like fuel and plastic. The trick is separating, or breaking, the bond between carbon and hydrogen to make methane consumable. For the past year, 海角社区 Chemical Engineering Assistant Professor Chris Arges has undertaken that very task.
鈥淭he emergence of low-cost natural gas has motivated many scientists and engineers to devise new processes to convert natural gas into high-value chemicals, rather than just burning it to power homes and vehicles, its lowest value,鈥� Arges said. 鈥淭he reason we鈥檙e working on this is so we come up with a new way to convert natural gas, which is mainly composed of methane, into other products such as liquid fuels like gas or jet fuel, or more importantly, other chemicals that can be used to make plastics and other consumable products that are found everywhere. It鈥檚 a very difficult proposition. The C-H bond in methane is hard to break.鈥�
Currently, plants and companies upgrade methane through a process called steam reforming, followed by the Fischer-Tropsch process, which is energy-intensive and cost-prohibitive.
鈥淭here are only six gas-to-liquid (GTL) plants worldwide, none of which are in the U.S. because it doesn鈥檛 financially make sense,鈥� Arges said. 鈥淧art of the reason why is you need a lot of energy to run that process. If you come up with a smaller, more modular technology that鈥檚 more effective, it鈥檚 very transformative. You can develop these plants in more diverse geographical locations, besides the fact that it would also cost less to make jet fuel, gas, and the building blocks for plastics and a variety of other chemicals.鈥�
Thanks to a $50,000 海角社区 LIFT2 grant, Arges and his team have been developing a reactor-separator that can upgrade methane into higher-order carbons which can be used to make consumable products while simultaneously producing hydrogen.
鈥淛ohn Flake [海角社区 Cain Department of Chemical Engineering chair] encouraged me to look at methane upgrading as a research topic from an electrochemistry perspective,鈥� Arges said. 鈥淎lmost no one has been looking at this route. By employing an electrochemical reactor, which is what we鈥檙e doing versus high-temperature reactors, you really have two driving forces at your disposal鈥攈eat and electrode potential. When you combine those two, you can be a lot more effective.
鈥淲e have shown in three-cell electrode setups that the electrochemical process works to convert methane to ethylene, but it isn鈥檛 conducive for a production scale. The 海角社区 LIFT2 grant allows us to redesign the electrochemical reactor using all solid-state materials with gas feeds. This design is modular and scalable. A surprising by-product of the reactor is also hydrogen, and the reactor separates the hydrogen from the upgraded methane products鈥攁n example of process intensification.鈥�
The reactor, which Arges normally uses to run fuel cell experiments, has been outfitted to convert methane into ethane, ethylene, and other large alkane/alkene molecules. To get the process to work, the reactor must be dry and operate above 100掳C.
鈥淚f you run these fuel cells north of 100掳C, the conventional fuel cell membranes used to help carry out the reactions cannot be used,鈥� Arges said. 鈥淲e had to develop a new class of proton-conducting membranes that conduct above 100掳C and under dry conditions while also being resilient to the harsh reactor conditions.鈥�
Though Arges has expertise in polymer membranes for electrochemical systems and has applied his membranes to water desalination, fuel cells, and flow batteries, this is the first time he has tailored this class of membranes to conduct under dry conditions and at temperatures greater than 100掳C.
The new set of membranes invented by Arges鈥� team also has utility for other technologies being researched at 海角社区.
鈥淲e鈥檙e working with other people, like Manas Gartia [海角社区 Mechanical Engineering assistant professor], who works on supercapacitor devices,鈥� Arges said. 鈥淭he membranes will help the supercapacitors, which are fast charging-discharging batteries, to run more effectively. Our membranes鈥� solid-state, flexible design will help realize smaller and flexible portable electronic devices.鈥�
From a commercial standpoint, Arges and his team are working to improve the proof of concept. He currently has a provisional patent on the project, with plans to establish a final patent in Spring 2019. In the meantime, he and his team are focused on showing how well the reactor-separator performs.
鈥淲e know that it works in the three-electrode cell setup,鈥� he said. 鈥淥ur design is modular technology that鈥檚 scalable. That鈥檚 what I think our customers, or people who understand what we鈥檙e doing, would appreciate. If you can reduce the energy amount by half to convert methane, or even ethane, to useful products, which we think we鈥檒l be able to do, that translates into $50 billion saved in operating costs per year globally.鈥�
As for a completion date on the project, Arges does not want to set anything in stone.
鈥淭here鈥檚 a tall order here,鈥� he said. 鈥淢any smart people have been trying to find ways to upgrade methane for a long time. Even if everything does not pan out, we think the reactor design and the new materials being developed will be useful for other things. That鈥檚 the one thing I鈥檝e learned in my short career. Maybe you won鈥檛 reach your final goal, but you鈥檒l probably make some other discoveries along the way that will be useful.鈥�
Like us on (@lsuengineering) or follow us on and &苍产蝉辫;(蔼濒蝉耻别苍驳颈苍别别谤颈苍驳).鈥�
###
Contact: Libby Haydel
Communications Specialist
225-578-4840